Validating and Estimating Indirect Accident Costs in Saudi Construction: A Bottom-Up Approach

Authors

  • Abdulaziz Alotaibi Department of Environmental and Occupational Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia
  • Shamsul Bahri Hj. Mohd Tamrin Department of Environmental and Occupational Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia
  • Ng Yee Guan Department of Environmental and Occupational Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia
  • Mohammad Hassanain Department of Architectural Engineering and Construction Management, College of Design and Built Environment, King Fahd University of Petroleum and Minerals

DOI:

https://doi.org/10.14738/assrj.1208.19238

Keywords:

Indirect Costs, Construction Accidents, Cost Estimation Framework, Occupational Health and Safety (OHS), Construction Industry, Saudi Arabia

Abstract

Accurately estimating the indirect costs of construction accidents is essential to fully understand their economic and social impacts, especially in Saudi Arabia’s rapidly growing construction sector. While direct costs like medical expenses are documented, indirect costs-including lost productivity, project delays, and training-often surpass direct costs but remain difficult to quantify. This study aimed to develop and validate a bottom-up framework to estimate indirect costs of construction accidents across diverse company sizes and project types in Saudi Arabia’s Eastern Province. A quantitative explanatory study was conducted from November 2020 to December 2022 involving 40 construction companies selected via quota sampling to represent various sizes and project types. Indirect cost indicators were identified based on Haupt and Pillay’s framework and validated by an expert panel using the Content Validity Index (CVI) and Kappa statistics. Data on overtime, supervisory time, investigation, training, equipment damage, legal/administrative, and miscellaneous costs were collected through structured questionnaires. Descriptive statistics analyzed cost variations by company size. All nine indirect cost indicators showed strong content validity with CVI scores of 0.8 to 1.0 and substantial expert agreement. Survey results revealed significant differences in indirect costs by company size. Medium-sized firms (101–500 employees) incurred the highest overtime and investigation costs, while large firms (>500 employees) exhibited the greatest supervisory, training, and legal expenses. Smaller firms (<50 employees) faced relatively higher equipment damage and miscellaneous costs. Geographic and project type diversity ensured comprehensive regional representation. The validated framework effectively captures the multifaceted indirect costs of construction accidents in Saudi Arabia. Findings highlight the need for size-specific safety interventions and resource allocation to reduce financial burdens. Tailored prevention strategies and enhanced training programs are crucial, particularly for medium and large companies, while smaller firms require targeted support to manage indirect cost challenges. This study provides a robust foundation for policymakers and industry leaders to improve occupational health and safety investments in the construction sector.

References

Umar, T. and N. Umeokafor, Exploring the GCC Progress Towards United Nations Sustainable Development Goals. International Journal of Social Ecology and Sustainable Development, 2022. 13(1): p. 1-32.

Abukhashabah, E., A. Summan, and M. Balkhyour, Occupational accidents and injuries in construction industry in Jeddah city. Saudi Journal of Biological Sciences, 2020. 27(8): p. 1993-1998.

Raqee, A., et al., Influence of Risk Reduction and Hedging on Project Management: Internal Control Mediator in Iraqi SMEs Construction, in Tech Fusion in Business and Society : Harnessing Big Data, IoT, and Sustainability in Business: Volume 2, R.K. Hamdan, Editor. 2025, Springer Nature Switzerland: Cham. p. 873-899.

Lip, T.K., et al., Entrepreneurial Knowledge and Sustainable SMEs Performance: The Mediation Role of Strategic Opportunity Recognition. Advances in Social Sciences Research Journal, 2025. 12(04): p. 24-42.

Alruwaili, M., et al., Occupational Accidents, Injuries, and Associated Factors among Migrant and Domestic Construction Workers in Saudi Arabia. Buildings, 2024. 14(9): p. 2714.

Jandab, A., et al., The influence of it capability on it-based innovation: the mediating role of organizational learning capability. Sci. Int.(Lahore), 2020. 32(4): p. 357-365.

Jandab, A., et al., IT-Based Innovation and New Product Development Performance in Yemen: The Moderating Role of Intellectual Property. International Journal of Business Society, 2019. 3(11): p. 1-8.

Gholizadeh, P. and B. Esmaeili, Cost of Occupational Incidents for Electrical Contractors: Comparison Using Robust-Factorial Analysis of Variance. Journal of Construction Engineering and Management, 2020. 146(7).

Alghamdi, M.A.A., et al., Antecedents and consequences of employee well-being: Empirical study on Saudi Aramco. Advances in Social Sciences Research Journal, 2021. 8(9): p. 22.

Alghamdi, M.A.A., et al., Employee Well Being and knowledge sharing behavior among employees of Saudi Aramco. Advances in Social Sciences Research Journal, 2021. 8(8): p. 261-284.

Wallenborn, J.T., et al., Workplace support and breastfeeding duration: The mediating effect of breastfeeding intention and self-efficacy. Birth, 2019. 46(1): p. 121-128.

Al-Zubaidi, R., et al., The Effect of Self-efficacy on Sustainable Development: The PetroMasila in Yemen. Advances in Social Sciences Research Journal, 2022. 9(12): p. 35-49.

Al-Zubaidi, R., et al., Promoting Sustainability in Yemeni Construction SMEs: Self-Efficacy Mediates Planning and Risk Management, in Entrepreneurship Innovation and Education for Performance Improvement, S.A. Salman and A. Bhaumik, Editors. 2024, IGI Global: Hershey, PA, USA. p. 72-113.

Al-Zubaidi, R., et al., Market Orientation and SMEs Performance: Unraveling the Mediating Effects of Innovation Capability Amidst Environmental Uncertainty, in Tech Fusion in Business and Society : Harnessing Big Data, IoT, and Sustainability in Business: Volume 2, R.K. Hamdan, Editor. 2025, Springer Nature Switzerland: Cham. p. 859-872.

Al-Zubaidi, R., et al., Sustainable Development Through Effective Project Management: The Petromasila in Yemen. Advances in Social Sciences Research Journal, 2023. 10(3): p. 269-290. 180

Al-Emad, N. and I. Rahman. An initial investigation on the challenges of managing construction workforce in Saudi Arabia. in IOP Conference Series: Materials Science and Engineering. 2017. IOP Publishing.

Al-Sharif, A.M., et al., The role of innovation capability in the relationship between entrepreneurial leadership and innovation performance in the SMEs service industry. Advances in Social Sciences Research Journal, 2023. 10(1): p. 264-278.

Al-Sharif, A., et al., Effects of Innovation Capability and Environmental Dynamism on the Relationship between Entrepreneurial Leadership and Innovation Performance in the SMEs Service Industry. International Journal of Academic Research in Business and Social Sciences, 2023. 13(10).

Nwulu, E.O., et al., Financial Modeling for EHS Investments: Advancing the Cost-Benefit Analysis of Industrial Hygiene Programs in Preventing Occupational Diseases. International Journal of Multidisciplinary Research and Growth Evaluation., 2024. 5(1): p. 1438-1450.

Al-Refaei, A.A.-A., et al., A Conceptual Framework for the Impact of Entrepreneurial Leadership on Innovation Work Behavior and Sustainable Innovation Performance, in Entrepreneurship Innovation and Education for Performance Improvement, S.A. Salman and A. Bhaumik, Editors. 2024, IGI Global: Hershey, PA, USA. p. 577-598.

Abdulsamad, A., et al., Entrepreneurial Orientation and Innovation Capabilities as Drivers of Sustainable Innovation Performance: A Conceptual Framework for SMEs, in Tech Fusion in Business and Society : Harnessing Big Data, IoT, and Sustainability in Business: Volume 2, R.K. Hamdan, Editor. 2025, Springer Nature Switzerland: Cham. p. 845-858.

Hinze, J., J.N. Devenport, and G. Giang, Analysis of Construction Worker Injuries That Do Not Result in Lost Time. Journal of Construction Engineering and Management, 2006. 132(3): p. 321-326.

Leigh, J.P., et al., Costs of occupational injury and illness across industries. Scand J Work Environ Health, 2004. 30(3): p. 199-205.

Abdulsamad, A., et al., The Impact of Market Orientation Components on Organizational Performance of SMEs. The single-industry approach" Food and Beverage Sector. Advances in Social Sciences Research Journal, 2021. 8(5): p. 504-516.

Abdulsamad, A., et al., The Importance of Entrepreneurial Orientation's Dimensions in Influencing the Organizational Performance of Food and Beverage SMEs. Advances in Social Sciences Research Journal, 2020. 7(12): p. 81-99.

Oxenburgh, M. and P. Marlow, The Productivity Assessment Tool: Computer-based cost benefit analysis model for the economic assessment of occupational health and safety interventions in the workplace. Journal of Safety Research, 2005. 36(3): p. 209-214.

Amador-Rodezno, R., An overview to CERSSO's self evaluation of the cost-benefit on the investment in occupational safety and health in the textile factories: “A step by step methodology”. Journal of Safety Research, 2005. 36(3): p. 215-229.

Abdulhadi, A.R., et al., The Impact of Internal Control on Project Management in Construction Site Among Small and Medium Enterprises in Iraq. Advances in Social Sciences Research Journal, 2023. 10(3): p. 247-

Abdulhadi, A.R., et al., The Impact of Risk Management on the Dimensions of Project Management Among Small and Medium Enterprises in Iraq. Advances in Social Sciences Research Journal, 2022. 9(11): p. 469-

Jallon, R., D. Imbeau, and N. de Marcellis-Warin, Development of an indirect-cost calculation model suitable for workplace use. Journal of Safety Research, 2011. 42(3): p. 149-164.

Government Organization of Social Insurance (GOSI). 2018 [cited 2025 8]; Available from: https://www.gosi.gov.sa/GOSIOnline/About_Portal&locale=en_US.

Haupt, T.C. and K. Pillay, Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 2016. 14(2): p. 373-419. 181

Gibb, A.G.F. and F. Isack, Client drivers for construction projects: implications for standardization. Engineering, Construction and Architectural Management, 2001. 8(1): p. 46-58.

Polit, D.F. and C.T. Beck, The content validity index: Are you sure you know what's being reported? critique and recommendations. Research in Nursing & Health, 2006. 29(5): p. 489-497.

Leigh, J.P., Economic Burden of Occupational Injury and Illness in the United States. Milbank Quarterly, 2011. 89(4): p. 728-772.

Heinrich, H.W., Petersen, D., & Roos, N., In dustrial accident prevention: a safety management approach. 1980.

Lingard, H. and S. Rowlinson, Occupational Health and Safety in Construction Project Management. 2004, Routledge.

Singh, A., J. Hinze, and R.J. Coble, Implementation of Safety and health on Construction Sites. 1999: CRC Press.

Gambatese, J.A., M. Behm, and S. Rajendran, Design’s role in construction accident causality and prevention: Perspectives from an expert panel. Safety Science, 2008. 46(4): p. 675-691.

Haslam, R.A., et al., Contributing factors in construction accidents. Applied Ergonomics, 2005. 36(4): p. 401-415.

Downloads

Published

2025-08-22

How to Cite

Alotaibi, A., Tamrin, S. B. H. M., Guan, N. Y., & Hassanain, M. (2025). Validating and Estimating Indirect Accident Costs in Saudi Construction: A Bottom-Up Approach. Advances in Social Sciences Research Journal, 12(08), 172–182. https://doi.org/10.14738/assrj.1208.19238