Is there any Significant Effect of Business Process Re-Engineering Strategy on Service Delivery in the Contextualization of Food Manufacturing Companies in Kenya?

Authors

  • Richard Nyaanga Ongeri
  • Peterson Obara Magutu
  • Kate Litondo

DOI:

https://doi.org/10.14738/abr.89.9075

Keywords:

Business Process Re-Engineering Strategy, Service Delivery, Food Manufacturing Companies and Kenya

Abstract

The main objective of the study was to determine if there any significant effect of business process re-engineering strategy on service delivery in the contextualization of food manufacturing companies in Kenya. Accordingly, the study sought to determine the effect of business process re-engineering strategy on service delivery of companies manufacturing food in Kenya. The population of the study comprised of the company’s manufacturing food in Kenya. A descriptive cross-sectional survey design was adopted in data collection and analysis. Primary data was collected from respondents using a structured questionnaire, while secondary data was collected from published firm’s reports. Out of the 75 respondents targeted by the study, 44 respondents forming 56.67% response rate, which was considered adequate for analysis with good representation from all the subsectors. On hypotheses testing, it was established that, 58.1% of variations in the service delivery are explained by variations in the BPR strategy namely resources mobilization for BPR, sponsorship and commitment, BPR cross-functional teams, analytical processes selection, BPR prototypes, management of re-engineered processes, clear BPR definition and vision. Thus, there is a significant relationship between BPR strategy and service delivery of companies manufacturing food in Kenya. HA1 is therefore supported. In conclusion, the study confirmed that there is a positive and statistically significant relationship between BPR strategy and service delivery of companies manufacturing food in Kenya, where 58.1% of variations in the service delivery is explained by variations in the BPR strategy namely resources mobilization for BPR, sponsorship and commitment, BPR cross functional teams, analytical processes selection, BPR prototypes, management of re-engineered processes, clear BPR definition and vision. The results therefore support the anchoring theory of resource advantage theory.

This study has contributed in different areas including implications to theory, policy, management practice and methodological contributions as discussed in the subsequent paragraphs. First, this study has advanced frontiers of knowledge from the study findings;  this study confirms that today’s competitive environment compels organizations to re-engineer their business processes to effect perfect service delivering for customer satisfaction which eventually leads to improved overall FP (Hussein, Bazzi, Dayekh & Hassan, 2013; Jurisch, Ikas, Wolfgang, Wolf & Kurcmar, 2012). The research findings have addressed the key gaps in this study. Secondly, this study has contributed to theory: the empirical relationship between BPR strategy and service is significant where BPR strategy constructs independently and positively influences improvements in service delivery with four significant predictors: resources mobilization for BPR; BPR cross-functional teams; sponsorship and commitment of top management; and the management of re-engineered processes. This study confirms and supports the use of resource based view theory. Thirdly on the study’s policy contributions: the study will guide policy makers to develop BPR strategies that will lead to improved service with the understanding that improved business processes facilitates organizations to maximize the value addition which eventually leads to improved service delivery. Lastly on the methodological contributions: key methodological contribution is the use of a quantitative composite index in computing the SD index, the use an integrated empirical model to test the relation between BPR strategies and service delivery; the study used a number of indicators to measure each construct, which improved the construct validity.

References

Al-Mashari, et al . (2001), “Process reengineering: a survey of international experience”, Business Process Management Journal, Vol. 7 No. 5, pp. 437-53, in E. Loukis K. Pazalos St. Georgiou, (2009), "An empirical investigation of the moderating effects of BPR and TQM on ICT business value", Journal of Enterprise Information Management, Vol. 22 Iss 5 pp. 564 – 586

Attong, M. & Metz, T. 2012. Change or Die: Business Process Improvement Manual. Hoboken: CRC Press.

Barney, J.B. (1991), ª Firm resources and sustained competitive advantageº , 201

Brynjolfsson, E. and L. Hitt (2000), “Beyond Computation: Information Technology, Organization Transformation and Business Performance,” Journal of Economic Perspectives, 14: 23-48.

Bryson, J., Crosby, B. C. & Bloomberg, L. 2014. Public Value Governance: Moving Beyond Traditional Public Administration and the New Public Management. Public Administration Review, 74 (4): 445-456.

Chang, J. F. 2012. Basic Principles of Business Process Management. Business Process Management Systems, (6): 47-55.

Chris Richards, (2018). Business Productivity Review - EEF submission: CPR and CE Marking, Department for Business, Energy and Industrial Strategy

Emmel, N. 2014. Sampling and Choosing Cases in Qualitative Research: A Realist Approach. London: Sage Publication.

Fahy, J. (2000). The resource-based view of the firm: some stumbling-blocks on the road to understanding sustainable competitive advantage. Journal of European Industrial Training, 24/2/3/4

Ganesh D. Bhatt, (2000),"Exploring the relationship between information technology, infrastructure and business process re-engineering", Business Process Management Journal, Vol. 6 Iss 2 pp. 139 – 163

Goll, E.O. & Cordovano, M.F. “Construction Time Again,” CIO, October 15, 1993, pp. 32-36.

Heizer, J. And Render, B., 2011. Operations Management (9th ed). Upper Saddle River: Prentice Hall.

Hunt, Shelby D. (2004), “On the Service-Centered Dominant Logic of Marketing,” Journal of Marketing, 68 (1), 21-22. In Ja-Shen C., Hung T.T., & Astrid Y. H. (2009) “Service Delivery Innovation: Antecedents and Impact on Firm Performance” Journal of Service Research; 12; 36

Hussein, B., Bazzi, H., Dayekh, A. & Hassan, W. 2013. Critical analysis of existing business process re-engineering models: towards the development of a comprehensive integrated model. Journal of Project, Program and Portfolio Management, 4(1): 30-40.

Ja-Shen C., Hung T.T., & Astrid Y. H. (2009) “Service Delivery Innovation: Antecedents and Impact on Firm Performance” Journal of Service Research; 12; 36 Center for Excellence in Service, University of Maryland

Jones, A. and Hendry, C., (1994): “The learning organisation: adult learning and organisationaL transformation”, British Journal of Management, Vol. 5, 1994, pp. 153-62.

Jurisch, M. C., Ikas, C., Wolfgang, P., Wolf, P. & Kurcmar, H. 2012. A review of success factors and challenges of public sector BPR implementations. Paper presented at 45th Hawaii International Conference on System Sciences. 4-7 January, Maui, Hawaii.

Kuwaiti M.E & John M. K, (2000),"The role of performance measurement in business process reengineering", International Journal of Operations & Production Management, Vol. 20 Iss 12 pp. 1411 – 1426

Laudon, k. C. & Laudon, j. P. (2006). Management information system: Managing the digital firm. 10 ed). Prentice Hall, Upper Saddle River. New Jersey.

Lovelock and Wright (2011): Services Marketing: People, Technology, Strategy, 7th edition. Journal of Services Marketing 18(5), Edition: 7. Prentice Hall. ISBN: 978-0-13-610721-7

MacLean L. M, Meyer M. and Estable A., (2004): Improving Accuracy of Transcripts in Qualitative Research. Qualitative Health Research. 2004;14(1):113–123.

Magutu, p.. & Kaptoge, G. K. (2010). Business process reengineering for competitive advantage:

Magutu, P.O., Mbeche, I.M., Njihia, J.M. and Nyaoga, R.B. (2016): ‘The Relationship between Supply Chain Strategies and Supply Chain Performance among Large-Scale Manufacturing Firms: The Moderating Effect of Supply Chain Technology’, EuroMed J. Management, Vol. 1, No. 2, pp.123–148.

Martonova, I. 2013. The integration of TQM and BPR. Quality Innovation and Prosperity, XVII(2): 59-76.

McIntosh, R. 2003. BPR: alive and well in the public sector. International Journal of Operations and Production Management, 23(3/4): 327-344. URL: http://dx.doi.org/10.14738/abr.89.9075 202

Mmereki, R.N. & Kgomotso, G.M. 2013. Challenges in Implementing Business Process Re-engineering in Botswana Public Hospitals. Journal on Customer Relations, 1(1): 31-37.

Nengwekhulu, R. 2009. Public service delivery challenges facing the South African Public Service. Journal of Public Administration , 44(2): 341-363.

Oberoi, R. 2016. Applying Business Process Re-engineering to the Public Sectors as New Public Management Strategy: Understanding Views and Limits. Journal of Governance and Politics, 4(2): 291 – 304.

Park, H.M. (2008). Univariate Analysis and Normality Test Using SAS, Stata, and SPSS. Technical orking Paper. The University Information Technology Services (UITS) Center for Statistical and

Ringim, K. J., Razalli, M. R., & Hasnan, N. (2011). Effect of Business Process Reengineering Factors on Organizational Performance of Nigerian banks: Information Technology Capability as the Moderating Factor. International Journal of Business and Social Science, 2(13), -

Santos-Vijande, L., Sanzo-Pérez, M.J., Gutiérrez, J.A.T. and Rodríguez, N.G. (2012) ‘Marketing capabilities development in small and medium enterprises: implications for performance’,Journalof Centrum Cathedra, Vol. 5, No. 1, pp.24–42.

Sekaran, U. & Bougie, R. 2013. Research Methods for Business: A Skill Building Approach. 6th edition. West Sussex: John Wiley & Sons.

Sharma M. (2006). Business Process Reengineering: A Tool to further Bank Strategic Goals. Journal of Management Information Systems 12: 1.

Slack, N.; Chambers, S. & Johnston, R. (2007). Operation Management. 5 ed. Prentice Hall. UK.

Verganti, R., and Buganza T., (2005), “Design Inertia: Designing for Life-Cycle Flexibility in Internet-Based Services,” Journal of Product Innovation Management, 22 (3), 223-237.

Wong, W.P., Ahmad, N.H., Nasurdin, A. M. & Mohammad, M.N. 2013. The Impact of External Environmental on Business Process Management and Organizational Performance. Serv Bus, 17 September: 559-586. Stellenbosch University https://scholar.sun.ac.za

World Bank, 2017)., Improving Nutrition through Multispectral Approaches(Washington, DC: World Bank. 2017. Doing Business. [Online]. Available:

Yubao C., Luca C., Yinghua L., Patrick W., Xuehe Z.,2017: A Qualitative Exploratory Investigation on the Purchase Intention of Consumers Affected by Long-term Negative Referral: A Case from the Chinese Milk Sector. Economia agro-alimentare/Food Economyt: https://www.researchgate.net/publication/313820274

Downloads

Published

2020-10-11

How to Cite

Ongeri, R. N., Magutu, P. O., & Litondo, K. (2020). Is there any Significant Effect of Business Process Re-Engineering Strategy on Service Delivery in the Contextualization of Food Manufacturing Companies in Kenya?. Archives of Business Research, 8(9), 189–203. https://doi.org/10.14738/abr.89.9075