Welding Defects Analysis with Various Alloys Using TIG and MIG Welding Process
DOI:
https://doi.org/10.14738/tecs.114.15280Keywords:
Welding Defect, Welding Using Various Alloys, TIG, MIGAbstract
This paper aims to analyze the process of tungsten inert gas and metal inert gas welding and the defects of welding. Metal inert gas and Tungsten inert gas welding are the most popular gas-shielded arc welding processes used in many industrial fields. MIG welding is more highly efficient than TIG welding. This research has focused on welding defects with various types of welding joints for various metal alloys by using tungsten inert gas and metal inert gas welding processes. In this work, mechanical properties such as yield stress, elastic stress, and breaking stress have also been found for both TIG and MIG welding processes.
References
Sen, R., Choudhury, S.P., Kumar, R. & Panda, A. (2018). A comprehensive review on the feasibility study of metal inert gas welding. Materials Today: Proceedings, 5, 792–801.
Lundin, C. D. (1983). Discontinuities in welds cause and effect. J. Mater. Energy Syst.;(United States), 5(3).
Dr-Ing, Habil, Radaj, D. (993). Reduction of welding residual stresses & distortion, Heat effects of Welding.
Park, H. J., Kim, D. C., Kang, M. J., & Rhee, S. (2008). Optimization of the wire feed rate during pulse MIG welding of Al sheets. Journal of Achievements in Materials and Manufacturing Engineering, 27(1), 83-86.
Kishore, K., Krishna, P. G., Veladri, K., & Ali, S. Q. (2010). Analysis of defects in gas-shielded arc welding of AISI1040 steel using Taguchi method. ARPN Journal of Engineering and Applied Sciences, 5(1), 37-41.
Khotiyan, S. K., & Kumar, S. (2014). Investigation of microstructure and mechanical properties of TIG and MIG welding using aluminum alloy. International Journal of Education and Science Research Review, 1(5), 90-96.
Wu, C. S., Ushio, M., & Tanaka, M. (1997). Analysis of the TIG welding arc behavior. Computational Materials Science, 7(3), 308-314.
Mirapeix, J., Cobo, A., Conde, O. M., Jaúregui, C., & López-Higuera, J. M. (2006). Real-time arc welding defect detection technique by means of plasma spectrum optical analysis. NDT & E International, 39(5), 356-360.
Kanemaru, S., Sasaki, T., Sato, T., Mishima, H., Tashiro, S., & Tanaka, M. (2014). Study for TIG–MIG hybrid welding process. Welding in the World, 58, 11-18.
Attar, V. K., Arora, H., Sharma, S. (2016). Tensile Strength of Welded Mild Steel specimen on Universal Testing Machine, International Journal of Engineering Sciences and Research Technology.
Ghazvinloo, H. R., Honarbakhsh-Raouf, A., & Shadfar, N. (2010). Effect of arc voltage, welding current and welding speed on fatigue life, impact energy and bead penetration of AA6061 joints produced by robotic MIG welding. Indian Journal of Science and Technology, 3(2), 156-162.
Koprivica, A., Bajić, D., Šibalić, N., & Vukčević, M. (2020). Analysis of welding of aluminum alloy AA6082-T6 by TIG, MIG and FSW processes from technological and economic aspect. Machines. Technologies. Materials., 14(5), 194-198.
Hussain, A. K., Lateef, A., Javed, M., & Pramesh, T. (2010). Influence of welding speed on tensile strength of welded joint in TIG welding process. International journal of applied engineering research, 1(3), 518.
Morisada, Y., Fujii, H., Inagaki, F., & Kamai, M. (2013). Development of high-frequency tungsten inert gas welding method. Materials & Design, 44, 12-16. 113
Tarng, Y. S., Tsai, H. L., & Yeh, S. S. (1999). Modeling, optimization and classification of weld quality in tungsten inert gas welding. International Journal of Machine Tools and Manufacture, 39(9), 1427-1438.
Vora, J., Patel, V. K., Srinivasan, S., Chaudhari, R., Pimenov, D. Y., Giasin, K., & Sharma, S. (2021). Optimization of activated tungsten inert gas welding process parameters using heat transfer search algorithm: With experimental validation using case studies. Metals, 11(6), 981.
Aravinth, P., Subramanian, S. P., Vishnu, S. G., & Vignesh, P. (2012). Process failure mode and effect analysis on TIG welding process-a criticality study. International Journal of Advances in Engineering & Technology, 3(2), 746.
Madavi, K. R., Jogi, B. F., & Lohar, G. S. (2022). Metal inert gas (MIG) welding process: A study of effect of welding parameters. Materials Today: Proceedings, 51, 690-698.
Arunkumar, S. P., Prabha, C., Saminathan, R., Khamaj, J. A., Viswanath, M., Ivan, C. K. P., … & Kumar, P. M. (2022). Taguchi optimization of metal inert gas (MIG) welding parameters to withstand high impact load for dissimilar weld joints. Materials Today: Proceedings, 56, 1411-1417.
Mishra, B., Panda, R. R., & Mohanta, D. K. (2014). Metal Inert Gas (MIG) welding parameters optimization. International Journal of Multidisciplinary and Current Research, 2(1), 637-639.
Stares, I. J., Duffil, C., Ogilvy, J. A., & Scruby, C. B. (1990). On-line weld pool monitoring and defect detection using ultrasonic. NDT international, 23(4), 195-200.
Caturano, G., Cavaccini, G., Ciliberto, A., Pianese, V., & Fazio, R. (2009). Liquid penetrant testing: industrial process. In Comm. SIMAI Congress (Vol. 3, pp. 319-1).
Arturo, G. R. M., Hugo, L. M. V., Rafael, G. H., Egberto, B. B., & Antonio, G. S. J. (2015). Electrochemical characterization of AISI 2205 duplex stainless steel welded joints with electromagnetic interaction. Procedia Materials Science, 8, 950-958.
Lincoln Electric, 2016. MIG and TIG Welding. [Online] Available at: http://www.lincolnelectric.com/enus/support/welding-howto/Pages/mig-tigweldingcategory.asp x. [Assessed: 18th April 2023].
Kumar, D. S., & Srikar, P. (2020). A Review on Comparison of Mechanical Properties of Dissimilar Steels Welded by TIG and MIG. In E3S Web of Conferences (Vol. 184, p. 01030). EDP Sciences.
Andrier, B., & Magloire, C. J. (1989, May). Advanced TIG and MIG Offshore Duplex Welding. In Offshore Technology Conference (pp. OTC-5892). OTC.
Mishra, R. R., Tiwari, V. K., & Rajesha, S. (2014). A study of tensile strength of MIG and TIG welded dissimilar joints of mild steel and stainless steel. International Journal of Advances in Materials Science and Engineering, 3(2), 23-32.
Agrawal, N., Thakur, M., Raj, J., & Baghel, A. (2017). A review on TIG/MIG welded joints. Int. J. Sci. Technol. Eng., 4, 65-71.
Yi, J., Cao, S., Li, L., Guo, P. & Liu, K. (2015). Effect of welding current on morphology and microstructure of Al alloy T-joint in double-pulsed MIG welding. Transactions of Nonferrous Metals Society of China, 25, 3204–3211. https://doi.org/10.1016/S1003- 6326(15)63953-X
Friedrich, H., & Schumann, S. (2001). Research for a “new age of magnesium” in the automotive industry. Journal of Materials Processing Technology, 117(3), 276-281.
Ogbonna, O. S., Akinlabi, S. A., Madushele, N., Mashinini, P. M., & Abioye, A. A. (2019, December). Application of MIG and TIG welding in automobile industry. In Journal of Physics: Conference Series (Vol. 1378, No. 4, p. 042065). IOP Publishing.
Bajpei, T., Chelladurai, H., & Ansari, M. Z. (2017). Experimental investigation and numerical analyses of residual stresses and distortions in GMA welding of thin dissimilar AA5052-AA6061 plates. Journal of Manufacturing Processes, 25, 340-350.
Ishak, M., Noordin, N. F. M., Razali, A. S. K., Shah, L. H. A., & Romlay, F. R. M. (2015). Effect of filler on weld metal structure of AA6061 aluminum alloy by tungsten inert gas welding. International Journal of Automotive and Mechanical Engineering, 11, 2438.
Sachin, L.S., Mayur, S., Pavan, K.M., Chandrashekar, A. & Ajaykumar, B.S. (2014). Evaluation of Structural and Mechanical Properties of TIG Welded Aluminium Alloy AA-5083 Subjected to Post Cryogenic Treatment. The Research Pubblications, 3(2),14–18.
Singh, R., Chauhan, S. & Gope, P.C. (2016). Influence of notch radius and strain rate on the mechanical properties and fracture behavior of TIG-welded 6061 aluminum alloy. Archives of Civil and Mechanical Engineering, 16, 513–23. https://doi.org/10.1016/j.acme.2016.01.002
Raveendra, A., Kumar, B.V.R.R. & Sivakumar, A.N. (2014). Effect of welding parameters on 5052 aluminium alloy weldments Using TIG welding. International Journal of Innovative Research in Science, Engineering and Technology, 3, 10302–10309.
Kumar, T.S. & Balasubramanian, V. (2007). Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy. Materials & Design, 28, 2080–92. https://doi.org/10.1016/j.matdes.2006.05.027
Vijayan, D., Rao, V.S., Shamsudeen, S., Edwin, J. & Dhas, R. (2017). Weld ability of AA 5052 H32 aluminium alloy by TIG welding and FSW process–A comparative study. Materials Science and Engineering, 247. https://doi.org/10.1088/1757-899X/247/1/012016
Salazar, J.M.G. De, Ureña, A., Villauriz, E., Manzanedo, S. & Barrena, I. (2010). TIG and MIG welding of 6061 and 7020 aluminium alloys. Microstructural studies and mechanical properties. Welding International, 13(4), 293-294. https://doi.org/10.1080/09507119909447381
Salleh, M.N.M., Ishak, M., Shah, L.H. & Idris, S.R.A. (2016). The effect of ER4043 and ER5356 filler metal on welded Al 7075 by metal inert gas welding. High Performance and Optimum Design of Structures and Materials II, 1, 213–24. https://doi.org/10.2495/hpsm160191
Wang, B., Xue, S., Ma, C., Han, Y. & Lin, Z. (2017). Effect of combinative addition of Ti and Sr on modification of AA4043 welding wire and mechanical properties of AA6082 welded by TIG welding. Transactions of Nonferrous Metals Society of China, 27, 272– 281. https://doi.org/10.1016/S1003-6326(17)60031-1
Fauzi, E.R.I., Jamil, M.S., Samad, Z. & Muangjunburee, P. (2017). Microstructure analysis and mechanical characteristics of tungsten inert gas and metal inert gas welded AA6082-T6 tubular joint: A comparative study. Transactions of Nonferrous Metals Society of China, 27, 17–24. https://doi.org/10.1016/S1003-6326(17)60003-7
Gupta, Y., Tanwar, A. & Gupta, R. (2016). Investigation of Microstructure and Mechanical Properties of TIG and MIG Welding Using Aluminium Alloy. Journal of Mechanical and Civil Engineering, 13, 121–126. https://doi.org/10.9790/1684-130508121126
Tsujikawa, M., Somekawa, H., Higashi, K., Iwasaki, H., Hasegawa, T. & Mizuta, A. (2004). Fatigue of Welded Magnesium Alloy Joints. Materials Transactions,45(2), 5–8. 115
Peter, I & Rosso, M. (2018). Investigations on Tungsten Inert Gas Welded Magnesium Alloy. 7th International Conference on Advanced Materials and Structures. https://doi.org/10.1088/1757-899X/416/1/012030
Wang, X. Y., Sun, D. Q., Yin, S. Q., & Liu, D. Y. (2015). Microstructures and mechanical properties of metal inert-gas arc welded Mg–steel dissimilar joints. Transactions of Nonferrous Metals Society of China, 25(8), 2533-2542.
Tuz, L., Kolasa, A. & Pfeifer, T. (2016). Structure and mechanical properties of MIG welded butt joints of magnesium alloys. Welding International, 30, 202–207.
Kumar, L. S., Verma, D. S., & Satyanarayana, D. V. (2010). Impact of Voltage on Austenitic Stainless Steel for The Process of TIG And MIG Welding. International Journal of Mechanical Engineering and Technology, 1(1), 60-75.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Md Abdul Hannan Mia, Mohammad Zoynal Abedin, Md. Selim Hossain, Md. Ashraf Ali, Md. Masud Rana, Samsul Islam, Zahid Ahsan, Shariful Islam

This work is licensed under a Creative Commons Attribution 4.0 International License.