Evaluating the Influence of Passive Design Strategies on Cooling Energy Demand in Local Adobe, Stone and Concrete Dwellings in Wadi Hadramout, Yemen

Authors

  • Omar Al-hebshi Faculty of Architecture and Planning, King Abdulaziz University, Jeddah, Saudi Arabia

DOI:

https://doi.org/10.14738/tecs.113.14815

Keywords:

Local Houses, Hadramout, Passive Design Strategies, Energy Demand, Simulation

Abstract

Vernacular architecture is the outcome of hundreds of years of optimization to provide comfortable dwellings and adapt with local climate conditions using available resources and construction techniques. Traditional buildings use passive cooling measures to provide thermal comfort without mechanical systems. In least developed countries like Yemen, severe power deficiency and consequent blackouts limit the use of air conditioning to provide indoor thermal comfort. In Hadramout province east of Yemen, climate responsive adobe dwellings are fading-out gradually and being replaced with modern buildings that neglect local climate and depend entirely on mechanical ventilation to provide comfort specially in summer. This paper investigates energy efficiency and the potential influence of passive design strategies in reducing energy demand for cooling in adobe, concrete and stone local houses in Wadi Hadramout during summer. The results indicated that adobe house requires 51.77% and 51.29% lower energy for cooling compared to concrete and stone houses respectively when refrigerated cooling is used. In case of the evaporative Cooling, adobe house requires 66.03% and 65.82% lower energy compared to concrete and stone houses respectively. Furthermore, the results showed that some passive design strategies have a remarkable impact on improving energy efficiency of the tested houses.

References

L. Pérez-Lombard, J. Ortiz, and C. Pout, “A review on buildings energy consumption information,” Energy Build., vol. 40, no. 3, pp. 394–398, Jan. 2008.

P. M. Cuce and S. Riffat, “A state of the art review of evaporative cooling systems for building applications,” Renew. Sustain. Energy Rev., vol. 54, pp. 1240–1249, 2016.

IEA, “World Energy Outlook 2006 Edition,” SourceOCDE Energ., vol. 2006, 2006.

“International - U.S. Energy Information Administration (EIA),” 2020. [Online]. Available: https://www.eia.gov/international/analysis/country/YEM. [Accessed: 02-Jan-2022].

H. Al-Shabi Mohammed and A.-S. Rami, “The Current Situation and Future Prospects of the Energy Sector in Yemen Ministry of Electricity & Energy,” in Korea–Yemen Energy Forum, 2014.

A. S. Rawea and S. Urooj, “Strategies, current status, problems of energy and perspectives of Yemen’s renewable energy solutions,” Renew. Sustain. Energy Rev., vol. 82, no. July 2017, pp. 1655–1663, 2018.

OCHA, “Yemen commodity tracker (January - March 2021) - Yemen | ReliefWeb,” 11-May-2021. [Online]. Available: https://reliefweb.int/report/yemen/yemen-commodity-tracker-january-march-2021. [Accessed: 03-Jan-2022].

O. Amer, R. Boukhanouf, and H. G. Ibrahim, “A Review of Evaporative Cooling Technologies,” Int. J. Environ. Sci. Dev., vol. 6, no. 2, pp. 111–117, 2015.

C. A. Balaras, K. Droutsa, E. Dascalaki, and S. Kontoyiannidis, “Heating energy consumption and resulting environmental impact of European apartment buildings,” Energy Build., vol. 37, no. 5, pp. 429–442, May 2005. URL: http://dx.doi.org/10.14738/tecs.113.14815. 153

S. Gou, V. M. Nik, J. L. Scartezzini, Q. Zhao, and Z. Li, “Passive design optimization of newly-built residential buildings in Shanghai for improving indoor thermal comfort while reducing building energy demand,” Energy Build., vol. 169, pp. 484–506, 2018.

K. M. Al-Obaidi, M. Ismail, and A. M. A. Rahman, “Passive cooling techniques through reflective and radiative roofs in tropical houses in Southeast Asia: A literature review,” Front. Archit. Res., vol. 3, no. 3, pp. 283–297, 2014.

A. Gagliano, M. Detommaso, F. Nocera, F. Patania, and S. Aneli, “The retrofit of existing buildings through the exploitation of the green roofs–a simulation study,” Energy Procedia, vol. 62, pp. 52–61, 2014.

A. Gagliano, F. Nocera, A. D’Amico, and C. Spataru, “Geographical information system as support tool for sustainable Energy Action Plan,” Energy Procedia, vol. 83, pp. 310–319, 2015.

G. Pérez, J. Coma, I. Martorell, and L. F. Cabeza, “Vertical Greenery Systems (VGS) for energy saving in buildings: A review,” Renew. Sustain. energy Rev., vol. 39, pp. 139–165, 2014.

F. Nocera, A. Lo Faro, V. Costanzo, and C. Raciti, “Daylight performance of classrooms in a mediterranean school heritage building,” Sustainability, vol. 10, no. 10, p. 3705, 2018.

M. M. Fernandez-Antolin, J. M. del Río, V. Costanzo, F. Nocera, and R. A. Gonzalez-Lezcano, “Passive design strategies for residential buildings in different Spanish climate zones,” Sustain., vol. 11, no. 18, 2019.

Y. Cerci, “A new ideal evaporative freezing cycle,” Int. J. Heat Mass Transf., vol. 46, no. 16, pp. 2967–2974, 2003.

Y. Jiang and X. Xie, “Theoretical and testing performance of an innovative indirect evaporative chiller,” Sol. Energy, vol. 84, no. 12, pp. 2041–2055, Dec. 2010.

D. K. Bhamare, M. K. Rathod, and J. Banerjee, “Evaluation of cooling potential of passive strategies using bioclimatic approach for different Indian climatic zones,” J. Build. Eng., vol. 31, no. January, p. 101356, 2020.

E. Ibrahim, L. Shao, and S. B. Riffat, “Performance of porous ceramic evaporators for building cooling application,” Energy Build., vol. 35, no. 9, pp. 941–949, 2003.

S. SZOKOLAY, INTRODUCTION TO ARCHITECTURAL SCIENCE : the basis of sustainable design. [Place of publication not identified]: ROUTLEDGE, 2017.

C. A. Balaras, K. Droutsa, A. A. Argiriou, and D. N. Asimakopoulos, “Potential for energy conservation in apartment buildings,” Energy Build., vol. 31, no. 2, pp. 143–154, Feb. 2000.

Z. Fang, N. Li, B. Li, G. Luo, and Y. Huang, “The effect of building envelope insulation on cooling energy consumption in summer,” Energy Build., vol. 77, pp. 197–205, 2014.

B. Farhanieh and S. Sattari, “Simulation of energy saving in Iranian buildings using integrative modelling for insulation,” Renew. Energy, vol. 31, no. 4, pp. 417–425, 2006.

D. I. Kolaitis, E. Malliotakis, D. A. Kontogeorgos, I. Mandilaras, D. I. Katsourinis, and M. A. Founti, “Comparative assessment of internal and external thermal insulation systems for energy efficient retrofitting of residential buildings,” Energy Build., vol. 64, pp. 123–131, 2013.

A. H. Algifri, S. M. Bin Gadhi, and B. T. Nijaguna, “Thermal behaviour of adobe and concrete houses in Yemen,” Renew. Energy, vol. 2, no. 6, pp. 597–602, Dec. 1992. 154 Al-hebshi, O. (2023). Evaluating the Influence of Passive Design Strategies on Cooling Energy Demand in Local Adobe, Stone and Concrete Dwellings

M. K. Al-Motawakel, S. D. Probert, and B. Norton, “Thermal behaviours of vernacular buildings in the Yemen Arab Republic,” Appl. Energy, vol. 24, pp. 245–276, 1986.

F. R. Arooz and R. U. Halwatura, “Mud-concrete block (MCB): mix design & durability characteristics,” Case Stud. Constr. Mater., vol. 8, no. November 2017, pp. 39–50, 2018.

“Climate Seiyun - meteoblue.” [Online]. Available: https://www.meteoblue.com/en/weather/historyclimate/climatemodelled/seiyun_yemen_70981. [Accessed: 28-Mar-2021].

F. H. Ai-shibami, “Thermal comfort and energy efficiency in yemeni houses,” 2004.

CEN, “Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics,” EN 15251, 2007.

“ ةقاطلاو ءابرهكلا ةرازو – ةــفرعتلا.” [Online]. Available: https://moee-ye.com/site-ar/ةــفرعتلا/. [Accessed: 16-Sep-2021].

Downloads

Published

2023-06-30

How to Cite

Al-hebshi, O. (2023). Evaluating the Influence of Passive Design Strategies on Cooling Energy Demand in Local Adobe, Stone and Concrete Dwellings in Wadi Hadramout, Yemen. Transactions on Engineering and Computing Sciences, 11(3), 135–155. https://doi.org/10.14738/tecs.113.14815