Temperature Equation of State of an Explosive Reactant

Authors

  • Yehuda Partom

DOI:

https://doi.org/10.14738/aivp.103.12501

Abstract

To use our TDRR reactive flow model [1-4], we need a temperature equation of state for both compressive and tensile deformation. Such an equation of state is usually constructed around a reference curve in the PV (pressure and specific volume) plane. We show how to construct these equations of state for V<V0, where the reference curve is the shock Hugoniot, and for VV0, where the reference curve is the axis P=0.

References

Y. Partom, A Void Collapse Model for Shock Initiation, 7 Symposium on Detonation, 506-522 (1981).

Y. Partom, Hydro-Reactive Computations with Temperature Dependent Reaction Rate, SCCM, 460-463 (2001).

Y. Partom, Characteristic code for shock initiation, LANL Report, LA-10773 (1986). th

Y. Partom, A Threshold Criterion for Impact Ignition, 12 Symposium on Detonation, 831-834 (2002).

Downloads

Published

2022-06-24

How to Cite

Partom, Y. (2022). Temperature Equation of State of an Explosive Reactant. European Journal of Applied Sciences, 10(3), 643–647. https://doi.org/10.14738/aivp.103.12501

Issue

Vol. 10 No. 3 (2022): European Journal of Applied Sciences

Section

Articles

License

Copyright (c) 2022 Yehuda Partom

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)

1 2 3 4 > >>