Mechanical Milling and Comprehensive Characterization of Dysprosium Oxide-Hematite Magnetic Ceramic Nanostructures

Authors

  • Monica Sorescu Duquesne University, Department of Physics, Fisher Hall, Pittsburgh, PA 15282, United States
  • Zachary Nickischer Duquesne University, Department of Physics, Fisher Hall, Pittsburgh, PA 15282, United States
  • Felicia Tolea National Institute of Materials Physics, Bucharest-Magurele, 077125, Romania
  • Mihaela Sofronie National Institute of Materials Physics, Bucharest-Magurele, 077125, Romania
  • Jordan C. Kelly Duquesne University, Department of Chemistry and Biochemistry, Mellon Hall, Pittsburgh, PA 15282, United States
  • Jennifer A. Aitken Duquesne University, Department of Chemistry and Biochemistry, Mellon Hall, Pittsburgh, PA 15282, United States

DOI:

https://doi.org/10.14738/aivp.1302.18604

Keywords:

oxides, Mossbauer spectroscopy, magnetic properties, optical properties

Abstract

Magnetic ceramic nanostructures of the type xDy2O3-(1-x)alpha-Fe2O3 (x=0.1 and 0.5) were synthesized by mechanochemical activation for ball milling times of 0, 2, 4, 8 and 12 hours. The 0-h Mӧssbauer spectrum was analyzed with a sextet characteristic to hematite. A second sextet for x=0.5 and a second and third sextet for x=0.1, with lower values of the hyperfine magnetic field, were assigned to dysprosium-doped hematite. An additional quadrupole-split doublet, whose relative abundance increased with the ball milling time and molar concentration, was assigned to superparamagnetic dysprosium iron perovskite (dysprosium orthoferrite) phase. The X-ray diffraction (XRD) patterns for the molar concentration x=0.5 showed the presence of DyFeO3 peaks after 12 h of milling. The hysteresis loops recorded at 5 K and an applied magnetic field of 5 T exhibited coercive fields that increased with ball milling time, while the hysteresis loops at 300 K were consistent with a strong paramagnetic component. The zero-field-cooling-field-cooling (ZFC-FC) measurements performed at 200 Oe and 5-300 K showed the effect of milling time on the Morin transition of hematite. The optical diffuse reflectance spectra showed that the samples were semiconductors with a band gap of ~2.1 eV.

References

Rozenberg, G.Kh., et al., High pressure structural studies of hematite Fe2O3, Physical Review B, 2002. 65: 064112.

Bergenmayer, W., et al., Ab Initio thermodynamics of oxide surfaces: O2 on Fe2O3 (0001), Physical Review B, 2004. 69: 195409.

Zheng, Y., et al., Quasicubic -Fe2O3 nanoparticles with excellent catalytic performance, Journal of Physical Chemistry B, 2006. 110: p. 3093-3097.

Wu, C., et al., Synthesis of hematite ( -Fe2O3) nanorods: Diameter-size and shape effects on their applications in magnetism, lithium ion battery, and gas sensors, Journal of Physical Chemistry B, 2006. 110: p.17806-17812.

Liu, J.Z., Morin transition in hematite doped with Iridium ions, Journal of Magnetism and Magnetic Materials, 1986. 54-57: p. 901-902.

Stroh, C., et al., Ruthenium oxide-hematite magnetic ceramics nanostructures, Ceramics International, 2015. 41: p. 14367-14375.

Wu, Y., et al., Phase evolution and microstructure characteristics of Mo-based Tb2O3-Dy2O3 composites synthesized by ball milling and sintering, Advanced Powder Technology, 2018.29: p.359-366.

Aghazadeh, M., et al., Evaluation of supercapacitive and magnetic properties of Fe3O4 nanoparticles electrochemically doped with dysprosium cations: Development of a novel iron-based electrode, Ceramics International, 2018.44: p.520-529.

Balg, M.M., et al., Surfactant assisted synthesis of rare earth Dy3+ substituted MnFe2O4 nanoparticles, Ceramics International, 2019.45: p.18014-18022.

Padmasree, G., et al., Study of structural, electrical and hyperfine properties of Dy doped YFeO3, Ceramics International, 2022.48: p.28980-28985.

Vinod, G., et al., Dysprosium doped Cu0.8Cd0.2DyxFe2-xO4 nano ferrites: A combined impact of Dy3+ on enhanced physical, optical, magnetic and DC-electrical properties, Ceramics International, 2023.49: p.2829-2851.

Huang, S.J., et al., Effect of Dy replacing Fe on microstructure, electrical properties, and magnetic properties of NiZnCo ferrite, Ceramics International, 2023.49: p.22204-22210.

Hashim, M., et al., Structural, optical, elastic and magnetic properties of Ce and Dy doped cobalt ferrites, Journal of Alloys and Compounds, 2020.834: p.155089.

Koval, V., et al., Effect of dysprosium substitution on crystal structure and physical properties of multiferroic BiFeO3 ceramics, Journal of the European Ceramic Society, 2014.34: p.641-651. 425

Almessiere, M.A., et al., Strong correlation between Dy3+ concentration, structure, magnetic and microwave properties of the [Ni0.5Co0.5] (DyxFe -x) O nanosized ferrites, Journal of Industrial and Engineering Chemistry, 2020.90: p.251-259. 2 4

Reddy, S.S.K., et al., Structural, electrical, magnetic and 57Fe Mӧssbauer study of polycrystalline multiferroic DyFeO3, Journal of Magnetism and Magnetic Materials, 2015.396: p.214-218.

Kumar, H., et al., Structural and magnetic study of dysprosium substituted cobalt ferrite nanoparticles, Journal of Magnetism and Magnetic Materials, 2016.401: p.16-21.

Rahimi, H., et al., The role of dysprosium on the structural and magnetic properties of (Nd1-xDyx)2Fe14B nanoparticles, Journal of Magnetism and Magnetic Materials, 2017.424: p. 199-206.

Kumar, P., et al., Role of dysprosium doping concentration on structural deformation of zin oxide nanoparticles, Physica B, 2021.621: p.413313.

Korkmaz, A.D., Intrinsic magnetic-optical features of Dy3+ ion substituted NiCuZn nanospinel ferrites via sonochemical approach, Physica B, 2023.654: p.414741.

Garcia-Martinez, G., et al., Phase evolution induced by mechanical milling in Ln2O3:TiO2 mixtures (Ln=Gd and Dy), Powder Technology, 2005.152: p.72-78.

Lv, D., et al., Ball milling and sintering of neutron absorber Mo-based Tb2O3-Dy2O3 composite and its characterization, Powder Technology, 2018.331: p.226-235.

Glasser, S., et al., Effects of mechanochemical activation on the structural, magnetic and optical properties of yttrium iron garnet-graphene nanoparticles, Physica B, 2023. 650: 414501.

Sorescu, M., et al., Formation of skyrmion phase in the Fe-Co-Si system by mechanochemical activation, Physica B, 2024. 688: 416153.

Glasser, S., et al., Synthesis and characterization of gadolinium oxide-hematite magnetic ceramic nanostructures, Journal of Minerals and Materials Characterization and Engineering, 2023. 11: p. 1-15.

Sorescu, M., et al., Mechanochemical synthesis and Mӧssbauer characterization of neodymium oxidehematite magnetic ceramic nanoparticles: Phase sequence and recoilless fraction, Materials Chemistry and Physics, 2022. 277: 125511.

Aljewaw, O.B., et al., Impact of Dy2O3 substitution on the physical, tructural and optical properties of lithium-aluminium-borate glass system, Applied Sciences, 2020. 10: 10228183.

Tauc, J., et al., Optical properties and electronic structure of amorphous germanium, Physica Status Solidi, 1966. 15: p. 627.

Mallick, P. and Dash, B.N., X-ray diffraction and UV-Visible characterizations of -Fe2O3 nanoparticles annealed at different temperature, Nanoscience and Nanotechnology, 2013. 3: p. 130-134.

Downloads

Published

2025-04-25

How to Cite

Sorescu, M., Nickischer, Z., Tolea, F., Sofronie, M., Kelly, J. C., & Aitken, J. A. (2025). Mechanical Milling and Comprehensive Characterization of Dysprosium Oxide-Hematite Magnetic Ceramic Nanostructures. European Journal of Applied Sciences, 13(02), 412–426. https://doi.org/10.14738/aivp.1302.18604