Using the Bioluminescent Method in the Food Industry
DOI:
https://doi.org/10.14738/aivp.1401.19984Keywords:
Hygiene, ATP, Bioluminescence method, Safety production, Food-borne diseasesAbstract
Foodborne illnesses affect millions of people worldwide each year, resulting from contamination by harmful microorganisms. Preventing these illnesses requires a systematic approach that addresses hazards at every stage of the food supply chain. Understanding how to control microbiological hazards is essential for ensuring food safety and protecting public health. Ensuring hygiene and safe food is the main task of the food industry. The confectionery industry is concerned with the processing of food commodities and the subsequent production of confectionery products. To achieve high-quality and safe confectionery products, a high level of hygiene and sanitation, as well as hygiene control of work surfaces, is essential. Rapid hygiene monitoring tests based on the presence of adenosine triphosphate have been widely used in the food industry to ensure that adequate cleanliness and work surface hygiene is maintained. The use of the bioluminescence method is justified in terms of preventing the occurrence of foodborne diseases. In our study, we evaluated the practical use of the bioluminescence method in evaluated food processing plant, where bioluminescence method is used as a technological advance to facilitate more accurate control of surface hygiene. Based on the results obtained in our study, we can conclude that surfaces hygienic level of evaluated technologies were at an adequate level, except for the package machine surface, where we detected 155 RLU (Relative Light Unit) before production and 301 RLU during production. The hygienic condition of the package machine surface after disinfection improved and ATP counts decreased to zero.
References
Marriott, N.G., Schilling, M.W. and Gravani R.B., Food Contamination Sources. Principles of Food Sanitation. Springer International Publishing, 2018. p. 83–91.
Baghapour, M.A., Mazloomi, S.M., Azizi, K., Microbiological Quality of Food Contact Surfaces in a hospital kitchen in Shiraz. J Health Sci Surveillance Sys., 2015. (4): p.128-132.
Rodríguez‐Caturla, M.Y. and Valero, A., Evaluation of hygiene practices and microbiological status of ready‐to‐eat vegetable salads in Spanish school canteens. J Sci Food Agric., 2012. 92(11): p. 2332-40.
Patel, D., Stansell, J. and Jaimes M. et al., A survey of microbial contamination on restaurant nonfood‐contact surfaces. Journal of Food Safety, 2017. 37(1): p.12287.
Lorenzo, F., Sanz-Puig, M., Berto, R. and Orihuel, E., Assessment of performance of two rapid methods for on-site control of microbial and biofilm contamination. Applied Sciences, 2020. 10(3): p. 744. Scholar Publishing
Suescún-Carrero, S., Avila-Panche, S., Microbiological evaluation in school feeding programs in educational institutions in the Department of Boyacá – Colombia. Nova, 2017. 15(28): p. 93-98.
Davidson, C., Griffith, C., Peters and A. et al., Evaluation of two metho for monitoring surface cleanliness-ATP bioluminescence and traditional hygiene swabbing. Luminescence, 1999. 14(1): p. 33-8.
Koo, O.K., Martin E.M. and Story R, et al., Comparison of cleaning fabrics for bacterial removal from food-contact surfaces. Food control, 2013. 30(1): p. 292-7.
Larson, E.L., Aiello, A.E. and Gomez-Duarte C. et al., Bioluminescence ATP monitoring as a surrogate marker for microbial load on hands and surfaces in the home. Food microbiology, 2003. 20(6): p. 735-9.
Costa, P.D., Andrade, N.J. and Brandão S.C.C. et al., ATP-bioluminescence assay as an alternative for hygiene-monitoring procedures of stainless-steel milk contact surfaces. Braz J Microbiol., 2006. 37(3): p. 345-9.
Vilar, M., Rodríguez-Otero, J. and Diéguez F. et al., Application of ATP bioluminescence for evaluation of surface cleanliness of milking equipment, Int J Food Microbiol., 2008. 125(3): p. 357-61.
Carrascosa, C., Saavedra, P. and Millán R. et al., Monitoring of cleanliness and disinfection in dairies: Comparison of traditional microbiological and ATP bioluminescence methods, Food Control., 2012. 28(2): p. 368-73.
Amaiach, R., E. Ouali Lalami, A., Fadil, M., Bouslamti, R. and Lairini S., Food safety knowledge, attitudes, and practices among food handlers in collective catering in central Morocco. Heliyon, 2024. 10(23): p. 40739.
Kirchner, R.M., Goulter, B.J., Chapman, J. Clayton, L.-A. and Jaykus, L.A., Cross contamination on atypical surfaces and venues in food service environments. J. Food Prot, 2021. 84: p. 1239-1251.
Jay, M. J., Loessner, M. J. and Golden, D. A., Modern Food Microbiology. Seventh Edition 2005, New York: Springer Science and Business Media. 789.
Jones, S.C., Ricke, D.K., Roper, K.E. and Gibson, S.L., Swabbing the surface: critical factors in environmental monitoring and a path towards standardization and improvement. Crit, Rev. Food Sci. Nutr, 2020; 60: p. 225-243.
Mildenhall, S.A., Rankin, K.B, Implications of adenylate metabolism in hygiene assessment. J. Food Prot, 2020. 83: p. 1619-1631.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Veszelits Lakticova Katarína, Vargová Mária

This work is licensed under a Creative Commons Attribution 4.0 International License.