The Investigation on Multi-stage Cold Forming Process for Manufacturing of SCM435 Alloy Steel Spherical Joints

Authors

  • Chih-Cheng Yang Department of Mechanical and Automation Engineering, Taiwan Steel University, Taiwan
  • Chun-Yi Huang Graduate School of Mechatronic Science and Technology, Taiwan Steel University, Taiwan
  • Shih-Chiang Wang Graduate School of Mechatronic Science and Technology, Taiwan Steel University, Taiwan

DOI:

https://doi.org/10.14738/aivp.1401.19987

Keywords:

multi-stage cold forming, spherical joints, formability, forming force, effective stress and strain distributions

Abstract

Multi-stage cold forming is commonly used for forging fasteners and parts. This study numerically simulates the five-stage cold forming process of SCM435 alloy steel spherical joints. The five-stage cold forming process includes preparation along with centering, upsetting, twice backward extrusions over a moving punch along with upsetting to spherical shape, and piercing. The numerical simulations of cold forming are carried out using the finite element code of DEFORM-3D. The formability of the workpiece is studied, such as the forming force response, maximum forming forces, effective stress and strain distributions, and metal flow pattern. In the five-stage forming process, the effective stress and effective strain of the workpiece are significantly increased due to the large deformation in the two forming stages of backward extrusion along with upsetting to a spherical shape, and in the forming stage of piercing. The flow line distributions are also very complex, especially the flow lines in the piercing region around the inner wall of the hole are severely bent and highly compacted, eventually leading to fracture. In the fourth stage, the workpiece is secondly backward extruded along with upset, and the maximum axial forming force is the largest of the five stages. In the third stage of the firstly backward extrusion along with upset, the forming energy is the highest of the five stages due to the longer acted axial forming stroke. From the first stage to the last stage, the total maximum axial forming forces are 2,209.5 kN and the total forming energies are approximately 4.60 kJ.

References

Sevenler, K.; Raghupati, P.S.; Altan, T., Forming Sequence Design for Multi-stage Cold Forging. Journal of Mechanical Working Technology, 1987. 14(2): p.121-135.

Altan, T. and Knoerr, M., Application of the 2D Finite Element Method to Simulation of Cold Forging Processes. Journal of Materials Processing Technology, 1992. 35: p. 275–302.

Lee, J.-H.; Kang, B.-S.; Lee, J.-H., Process design in multi-stage cold forging by the finiteelement method. Journal of Materials Processing Technology, 1996. 58(2-3): p.174-183.

Joun, M.S.; Lee, S.W.; Chung, J.H., Finite element analysis of a multi-stage axisymmetric forging process. International Journal of Machine Tools and Manufacture, 1998. 38: p. 843-854.

Roque, C.M.O.L. and Button, S.T., Application of the finite element method in cold forging processes. Journal of the Brazilian Society of Mechanical Sciences, 2000. 22(2): p. 189-202.

Cho, H.Y.; Min, G.S.; Jo, C.Y.; Kim, M.H., Process design of the cold forging of a billet by forward and backward extrusion. Journal of Materials Processing Technology, 2003. 135(2-3): p.375-381.

Hu, X.L.; Wang, Z.R., Numerical simulation and experimental study on the multi-step upsetting of a thick and wide flange on the end of a pipe. Journal of Materials Processing Technology, 2004. 151(1): p. 321–327.

Park, K.S.; VanTyne, C.J.; Moon, Y.H., Process analysis of multistage forging by using finite element method. Journal of Materials Processing Technology, 2007. 187–188: p. 586-590.

Farhoumand, A. and Ebrahimi, R., Analysis of forward–backward-radial extrusion process. Materials & Design, 2009. 30: p. 2152-2157.

Ji, D.S.; Jin, J.S.; Ma, W.J.; Xia, J.C.; Xia, H.G.; Dong, Y., Multistage Cold Extrusion Process and Forming Rules of Shaft Parts Used in Gearbox. Advanced Materials Research, 2010. 148-149: p. 683–687.

Paćko, M.; Sleboda, T.; Macioł, S.; Packo, P., Optimization of a Bolt Forming Process by Means of Numerical Simulation. Steel Research International, 2012.

Kang, B.S.; Ku, T.W., Experimental Study on Multi-Stage Cold Forging for an Outer Race of a CV Joint. Transactions of Materials Processing, 2014. 23: p.221–230.

Yang, C.-C. and Lin, X.-Y., The Forming Analysis of Two-stage Extrusion for 1010 Fastener. Journal of Mechanical Engineering and Automation, 2016. 6: p. 43-45.

Ku, T.-W., A Study on Two-Stage Cold Forging for a Drive Shaft with Internal Spline and Spur Gear Geometries. Metals, 2018. 8(11): 953.

Obiko, J.O.; Mwema, F.M.; Bodunrin, M.O., Finite Element Simulation of X20CrMoV121 Steel Billet Forging Process Using the Deform 3D Software. SN Applied Sciences, 2019. 1(9). Scholar Publishing

Byun, J.B.; Razali, M.K.; Lee, C.J.; Seo, I.D.; Chung, W.J.; Joun, M.S., Automatic Multi-Stage Cold Forging of an SUS304 Ball-Stud with a Hexagonal Hole at One End. Materials, 2020. 13: 5300.

Jo, A.R.; Jeong, M.S.; Lee, S.K.; Moon, Y.H.; Hwang, S.K., Multi-Stage Cold Forging Process for Manufacturing a High-Strength One-Body Input Shaft. Materials, 2021. 14(3): 532.

Lee, H.-S.; Park, S.-G.; Hong, M.-P.; Kim, Y.-S., Process design of multi-stage cold forging with small size for ESC solenoid valve parts. Journal of Mechanical Science and Technology, 2022. 36: p. 359-370.

Yang, C.-C. and Liu, C.-H., The Study of Multi-Stage Cold Forming Process for the Manufacture of Relief Valve Regulating Nuts. Applied Sciences, 2023. 13(10), 6299.

Yang, C.-C.; Sumampow, Y.; Cruz, S.N.D., The Cold Forming Analysis of Eccentric Parts. European Journal of Applied Sciences, 2023. 11(3): p. 407-421.

Winiarski, G.; Gontarz, A.; Skrzat, A.; Wójcik, M.; Wencel, S., Analysis of a New Process for Forming Two Flanges Simultaneously in a Hollow Part by Extrusion with Two Moving Dies. Metals, 2024. 14(6), 612.

Yang, C.-C.; Vien, T.T.T.; Lin, Y.-S., The Cold Forming Analysis of Stainless Battery Bolts. European Journal of Applied Sciences, 2025. 13(2): p. 72-83.

Hosford, W.F., Mechanical Behavior of Materials, Cambridge University, NY, USA, 2005.

Downloads

Published

2026-02-17

How to Cite

Yang, C.-C., Huang, C.-Y., & Wang, S.-C. (2026). The Investigation on Multi-stage Cold Forming Process for Manufacturing of SCM435 Alloy Steel Spherical Joints. European Journal of Applied Sciences, 14(01), 656–666. https://doi.org/10.14738/aivp.1401.19987

Most read articles by the same author(s)