Paradox Kobasko as Green Avenue for Design Super Strong Materials
DOI:
https://doi.org/10.14738/aivp.1401.19991Abstract
In the paper the three principles of transient nucleate boiling are used to explain why during quenching in cold fluid, performed under increasing pressure, very important for the practice paradox takes place. Its essence consists in simultaneously increase surface temperature and quick decrease core temperature of quenched steel part when heat transfer coefficient tends to infinity. The discovered paradox can be explored for designing super strong bainite via intense quenching combined with the low and high temperature thermomechanical treatment. The paradox is observed when quench tank is hermitized, the probe is immersed into quenchant and pressure is immediately increased. The two generalized fundamental equations related to transient nucleate boiling and convection create the basis for designing software that governs intensive quenching (IQ) process and bainitic transformations. The schematic installations for quenching samples in cold fluid under pressure is discussed in the paper. Example of calculation is provided. The article can be used by students, engineers, professors and just by good people who are interested in achievements of physics.
References
Kobasko N.I., Three Principles of Transient Nucleate Boiling to be Used for Designing Super Strong Bainite, European Journal of Applied Sciences, Vol. 13, No. 06, pp.195 – 205, 2025.
Kobasko N.I. Heat transfer fundamentals concerning quenching materials in cold fluids//IntechOpen. Heat Transfer Fundamentals Concerning Quenching Materials in Cold Fluids, November 3, 2023. DOI:http://dx.doi.org/10.5772/intechopen.113240.
Kobasko N.I., Steel Quenching in Liquid Media under Pressure, Naukova Dumka, 1980, p 206
Kobasko, N.I., Self – regulated thermal process taking place during hardening of materials and its practical use, Theoretical Physics Letters, Vol. 10, No. 02, 2022, pp.273 - 287. DOI -10.1490/5012578.763ptl,
Kobasko N.I, Aronov M.A, Powell J.A, and Totten G.E., Intensive Quenching System: Engineering and Design, ASTM International, 2010, p 234
Tamura, C., et. al, Thermomechanical Processing of High Strength Low Alloy Steels, Butterworths, London, 1988. Scholar Publishing
Bhadeshia. H.K.D.H., Bainite in Steels: Theory and Practice, 3rd Edition, Money Publishing, 2015. 616 p.
Bhadeshia. H.K.D.H., Theory of Transformations in Steels, CRC Press, Boca Raton, London, New York, 2021, 609 p.
Kobasko N.I., Optimal hardenability steel and method for its composing, Lambert Academic Publishing, Mauritius, 2018, 116 p. ISBN: 978-613-9-82531-8.
Grossmann M.A., Principles of Heat Treatment, American Society for Metals, 1964, p 303
Totten G.E., Bates C.E., and Clinton N.A., Handbook of Quenchants and Quenching Technology, ASM International, 1993, p 513
ASM Handbook, Vol. 4B: Steel Heat Treating Technologies, Jon I. Dossett and George E. Totten (Eds.), Heat Treating Society, Materials Park, OH 44073, USA, 2024.
ASM Handbook, Vol. 4A, Steel Heat Treating Fundamentals and Processes Technologies, Jon I. Dossett and George E. Totten (Eds.), Heat Treating Society, Materials Park, OH 44073, USA, 2013, 768.
French H.J, The Quenching of Steels, American Society for Steel Treating, 1930.
Ferguson B.L, Applying DANTE Heat Treat Modeling to Intensive Quenching, Presentation at the Intensive Quenching Workshop held on April 24 in Cleveland, Ohio, USA, 2013.
Lykov A.V, Teoriya Teploprovodnosti Theory of Heat Conductivity, Vysshaya Shkola, 1967, p
Nozdrev V.F, Senkevich A.A, A Course of Statistical Physics, Vysshaya Shkola, Moscow, 1969, 288.
Frenkel Ya. I, Kinetic Theory of Liquids, Selected Works, Vol. 3, Academy of Sciences of the USSR, Moscow, 1959.
Fedorov V.I., Kovalenko G.V, Kostanchuk D.M, On the Issue of Boiling Up a Liquid on a Metal Surface, IFZh, Vol. 32, No. 1, , pp. 18–23, 1977.
Kobasko N.I, Intensive Steel Quenching Methods, Theory and Technology of Quenching, B. Liscic, H.M. Tensi, and W. Luty, Eds., Springer-Verlag, 1992, p 367–389
Guseynov Ch.E, et. al., Some Mathematical Models with Nonlinear Boundary Condition and Their Solutions for Intensive Quenching of Steels, Applied Mathematics and Mathematical Physics (Computer Modeling and New Technology), Vol. 10, No. 3, 2006, pp. 62–74.
Buikis A, Multidimensional Mathematical Models for Intensive Steel Quenching, Lambert Academic Publishing, Berlin, 128 p., 2020.
Pioro, I.L. et al., Experimental study of the effect of non-circular flow geometry on the critical heat flux, Nuclear Engineering and Design, 187, 1999, pp. 339 – 362.
Kobasko N.I, Quenching Apparatus and Method for Hardening Steel Parts, US. Patent 6,364,974 BI, April 2, 2002.
Kobasko N. I. and Morganiuk.V.S., Numerical Study of Phase Changes, Current and Residual Stresses at Quenching Parts of Complex Configuration, Proceedings of the 4th International Congress of Heat Treatment Materials, Berlin, 1985, Vol. 1, pp. 465–486.
Rath J, Luebben Th, Hoffmann FR., Zoch H.W., Generation of compressive residual stresses by high-speed water quenching. International Heat Treatment and Surface Engineering, 4 (4), 2010, pp. 156–159. doi:10.1179/174951410x12851626812970. of Cooling Characteristics of Scholar Publishing Quench Oils by Cooling Curve Analysis, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2001.
Inoue T. and Arimoto K., Development and Implementation of CAE System “Hearts” for Heat Treatment Simulation Based on Metallo-thermo-mechanics, Journal of Materials Engineering and Performance, Vol. 16, No. 1, 1997, pp. 51–60.
Ferguson B.L, Freborg A.M, and Li Z., Improving Gear Performance by Intensive Quenching, Proceedings of the 24th ASM Heat Treating Conference, 2007, pp. 156–162.
Aronov M.A., Powell J.A, Forging Process Improvement Using Intensive Quenching Immediately After Forging Operations are Completed, Proceedings of Forging Technical Conference, Columbus, Ohio, USA, 2016.
Kobasko N.I., Thermal equilibrium and universal correlation for heating – cooling time evaluation, Theoretical Physics Letters, Vol. 9, No. 10, pp. 205 – 219, 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Kobasko, N. I.

This work is licensed under a Creative Commons Attribution 4.0 International License.