Application of TOPSIS Method for Determination of the Best Dressing Parameters in Internal Cylindrical Grinding
DOI:
https://doi.org/10.14738/aivp.116.16108Keywords:
Internal cylindrical grinding, MCDM, TOPSIS method, Entropy method, Surface roughness, Wheel life, SKD11Abstract
The outcomes of an investigation on establishing the best input process variables for dressing process in internal grinding SKD11 tool steel for obtaining minimal surface roughness (RS) and maximum wheel life (T) all simultaneously are given in this article. To achieve this, the multi-criteria decision-making (MCDM) problem was dealt with employing the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) techniques, and the weights of criteria were computed using the Entropy method. Furthermore, the following input factors were examined: coarse dressing depth, coarse dressing passes, fine dressing depth, fine dressing passes, non-feeding dressing, and dressing feed rate. This experiment was constructed using the Taguchi method and an L16 orthogonal array. Based on the results of the investigation, the best dressing mode for internal cylindrical grinding is being suggested.
References
Hung, L.X., et al. Optimization of manufacturing time in internal grinding. in Advances in Engineering Research and Application: Proceedings of the International Conference on Engineering Research and Applications, ICERA 2019. 2020. Springer.
Tran, T.-H., et al., Optimization of replaced grinding wheel diameter for minimum grinding cost in internal grinding. Applied Sciences, 2019. 9(7): p. 1363.
Chen, M., et al., Assessment of surface structure optimization in internal cooling grinding. The International Journal of Advanced Manufacturing Technology, 2022. 123(5-6): p. 2139-2155.
Hung, L.X., et al., multi-objective optimization of dressing parameters of internal cylindrical grinding for 9CrSi Aloy steel using taguchi method and grey relational analysis. Materials Today: Proceedings, 2019. 18: p. 2257-2264.
Tuan, N.A., et al. Optimization of dressing parameters for minimum surface roughness and maximum material removal rate in internal grinding of SKD11 tool steel. in E3S Web of Conferences. 2021. EDP Sciences.
Guo, S., W. Zhang, and X. Gao, Business risk evaluation of electricity retail company in China using a hybrid MCDM method. Sustainability, 2020. 12(5): p. 2040.
Yeh, T.-M., F.-Y. Pai, and C.-W. Liao, using a hybrid MCDM methodology to identify critical factors in new product development. Neural Computing and Applications, 2014. 24: p. 957-971.
Lee, Y.-C., P.-H. Chung, and J.Z. Shyu, Performance evaluation of medical device manufacturers using a hybrid fuzzy MCDM. 2017.
Sotoudeh-Anvari, A., The applications of MCDM methods in COVID-19 pandemic: A state of the art review. Applied Soft Computing, 2022: p. 109238.
YILMAZ, B.Ö., H. TOZAN, and M.A. KARADAYI, Multi-Criteria Decision Making (MCDM) Applications in Military Healthcare Field. Journal of Health Systems and Policies, 2020. 2(2): p. 149-181.
Sánchez-Lozano, J. and O.N. Rodríguez, Application of Fuzzy Reference Ideal Method (FRIM) to the military advanced training aircraft selection. Applied soft computing, 2020. 88: p. 106061.
Hung, K.-C., et al., A decision support system for engineering design based on an enhanced fuzzy MCDM approach. Expert Systems with Applications, 2010. 37(1): p. 202-213.
Kazimieras Zavadskas, E., et al., Hybrid multiple criteria decision-making methods: A review of applications in engineering. Scientia Iranica, 2016. 23(1): p. 1-20.
Nguyen, H.-Q., et al., A comparative study on multi-criteria decision-making in dressing process for internal grinding. Machines, 2022. 10(5): p. 303.
Linh, N.H., et al. Determining Best Dressing Parameters for Internal Cylindrical Grinding Using MABAC Method. in International Conference on Engineering Research and Applications. 2022. Springer.
Hwang, C.-L., Y.-J. Lai, and T.-Y. Liu, A new approach for multiple objective decision making. Computers & operations research, 1993. 20(8): p. 889-899.
Hieu, T.T., N.X. Thao, and L. Thuy, Application of MOORA and COPRAS Models to Select Materials for Mushroom Cultivation. Vietnam Journal of Agricultural Sciences, 2019. 17(4): p. 32-2331.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Truong Thi Thu Huong, Le Xuan Hung, Nguyen Van Trang
This work is licensed under a Creative Commons Attribution 4.0 International License.
