Evaluation of Brands of Ascorbic Acid Tablets on the Market After Exposure to Sunlight and Temperature in Sierra Leone
DOI:
https://doi.org/10.14738/aivp.1401.20022Keywords:
Vitamin C Tablets, dosage uniformity, assay compliance, friability, physicochemical qualityAbstract
This study evaluated the quality, stability, and regulatory status of selected vitamin C tablet brands marketed in Freetown under different storage conditions. An experimental study design was employed involving ten (10) brands of vitamin C tablets purchased from registered pharmacies in the Western Area Urban between October and November 2021. Baseline physicochemical analyses were conducted, after which samples were exposed to sunlight and elevated temperature (40 ± 1 °C) for six months, alongside a control stored under recommended conditions. Quality assessment was carried out in accordance with British Pharmacopoeia (BP) 2022 and USP <905> standards, including identification by Thin Layer Chromatography, assay of ascorbic acid content, uniformity of dosage units, friability, and disintegration testing. Results showed that friability values for all samples remained within acceptable limits (≤1%), indicating adequate mechanical strength. Significant degradation of ascorbic acid content was observed following exposure to sunlight and elevated temperature. At baseline, 7 out of 10 samples (70%) complied with BP assay specifications, while after six months of exposure, only 3 samples (30%)—C2, C5, and C7—remained within specification under both stress conditions. One sample (C9) consistently demonstrated extreme assay failure (≤58% of label claim) and failed the uniformity of dosage units’ test, with acceptance values ranging from 41.87 to 56.5. Additionally, 5 out of 10 products (50%) were unregistered, highlighting gaps in regulatory compliance within the pharmaceutical supply chain. Prolonged exposure to sunlight and high temperature reduces the chemical stability and dosage uniformity of vitamin C tablets, even when physical strength remains acceptable. The findings highlight the need for stronger regulatory oversight, enforcement of product registration, improved storage practices and increased public awareness to ensure the quality and safety of pharmaceutical products.
References
Ahmed, R. (2024). The Role of cGMP in the Manufacturing Unit of a Pharmaceutical Industry. Radinka Journal of Health Science, 2(2), 242-253.
Ashokbhai, M. K., Sanjay, L. R., Sah, S. K., & Kaity, S. (2024). Drug dissolution studies of pharmaceutical formulations. In Physico-Chemical Aspects of Dosage Forms and Biopharmaceutics (pp. 61-84). Academic Press.
Aslam, F., Muhammad, S. M., Aslam, S., & Irfan, J. A. (2017). Vitamins: key role players in boosting up immune response-a mini review. Vitamins & Minerals, 6(01).
Badnjević, A., Pokvić, L. G., Deumić, A., & Bećirović, L. S. (2022). Post-market surveillance of medical devices: A review. Technology and Health Care, 30(6), 1315-1329.
Berretta, M., Quagliariello, V., Maurea, N., Di Francia, R., Sharifi, S., Facchini, G., ... & Montopoli, M. (2020). Multiple effects of ascorbic acid against chronic diseases: Updated evidence from preclinical and clinical studies. Antioxidants, 9(12), 1182.
Chabalenge, B., Sahota, T., Ermolina, I., & Tanna, S. (2025). Substandard and falsified medicines in Africa: healthcare systems challenges, supply chain issues, regulatory challenges and strategies to increase access to quality medicines. Frontiers in Pharmacology, 16, 1708784.
Chauhan, Y. S., Nex, R., Sevak, G., & Rathore, M. S. (2021). Stability testing of pharmaceutical products. Research Journal of Pharmaceutical Dosage Forms and Technology, 13(4), 317-328.
Chen, W., Wang, J., Desai, D., Chang, S. Y., Kiang, S., & Lyngberg, O. (2017). A strategy for tablet active film coating formulation development using a content uniformity model and quality by design principles. Comprehensive Quality by Design for Pharmaceutical Product Development and Manufacture, 193-233.
Couffinhal, A., & Socha-Dietrich, K. (2017). Ineffective spending and waste in health care systems: Framework and findings.
Ekeigwe, A. A. (2019). Drug manufacturing and access to medicines: the West African story. A literature review of challenges and proposed remediation. AAPS Open, 5(1), 1-15.
Emagn Kasahun, A., Joseph, N. M., & Belete, A. (2022). Practices of tablet splitting and dose uniformity of fragments at public hospitals in Ethiopia: A cross-sectional study supported by experimental findings. PloS one, 17(12), e0279135.
Enright, K. (2021). Elusive quality: the challenges and ethical dilemmas faced by international nongovernmental organisations in sourcing quality assured medical products. BMJ global health, 6(Suppl 3), e004339.
Ezealisiji, K. M., Pepple, A. R., Stanly, C. N., & Ezealisiji, K. M. (2016). Effect of sunlight, moisture, temperature and ultraviolet radiation on the quality control parameters of ciprofloxacin tablet formulation. International Journal of Drug Delivery, 8(3), 99.
Ghourichay, M. P., Kiaie, S. H., Nokhodchi, A., & Javadzadeh, Y. (2021). Formulation and quality control of orally disintegrating tablets (ODTs): recent advances and perspectives. BioMed Research International, 2021(1), 6618934.
Scholar Publishing Giannakourou, M. C., & Taoukis, P. S. (2021). Effect of alternative preservation steps and storage on vitamin C stability in fruit and vegetable products: Critical review and kinetic modelling approaches. Foods, 10(11), 2630.
Herbig, M. E., Evers, D. H., Gorissen, S., & Köllmer, M. (2023). Rational design of topical semi-solid dosage forms-how far are we?. Pharmaceutics, 15(7), 1822.
Hofmanová, J. K. (2020). Sensory assessment and acceptability of coated tablets relationship between instrumental methods and human data (Doctoral dissertation, University of Birmingham).
Kashinath, K. P., Sardar, M. S., Sah, S. K., & Kaity, S. (2024). Stability and accelerated stability studies of dosage forms. In Physico-Chemical Aspects of Dosage Forms and Biopharmaceutics (pp. 19-42). Academic Press.
Khadim, R. M., & Al-Fartusie, F. S. (2021, March). Antioxidant vitamins and their effect on immune system. In Journal of Physics: Conference Series (Vol. 1853, No. 1, p. 012065). IOP Publishing.
Khan, A., & Iqbal, Z. (2017). Dissolution testing of bilayer tablets: Method development, validation and application in post-marketing quality evaluation. Dissolution technologies, 24(4), 36-46.
Kim, E. J., Kim, J. H., Kim, M. S., Jeong, S. H., & Choi, D. H. (2021). Process analytical technology tools for monitoring pharmaceutical unit operations: a control strategy for continuous process verification. Pharmaceutics, 13(6), 919.
Lee, S. H., Kim, J. K., Jee, J. P., Jang, D. J., Park, Y. J., & Kim, J. E. (2022). Quality by Design (QbD) application for the pharmaceutical development process. Journal of Pharmaceutical Investigation, 52(6), 649-682.
Lukášová, I., Muselík, J., Franc, A., Goněc, R., Mika, F., & Vetchý, D. (2017). Factor analysis in optimization of formulation of high content uniformity tablets containing low dose active substance. European Journal of Pharmaceutical Sciences, 109, 541-547.
Maheshwari, R., Todke, P., Soni, N., Raval, N., Deb, P. K., Amarji, B., ... & Tekade, R. K. (2018). Stability and degradation studies for drug and drug product. In Dosage Form Design Considerations (pp. 225-257). Academic Press.
Mazdi, N. T. A., Mior Mat Zin, N. A., Khairul Hisham, M. A., Mohd Rus, S., Haris, M. S., & Chatterjee, B. (2025). Optimizing paracetamol-ascorbic acid effervescent tablet characteristics: a quality by design approach. Drug Development and Industrial Pharmacy, 51(6), 647-658.
Mehta, P., & Bhayani, D. (2017). Impact of space environment on stability of medicines: challenges and prospects. Journal of pharmaceutical and biomedical analysis, 136, 111-119.
Mieszczakowska-Frąc, M., Celejewska, K., & Płocharski, W. (2021). Impact of innovative technologies on the content of vitamin C and its bioavailability from processed fruit and vegetable products. Antioxidants, 10(1), 54.
Mishra, D. N. P. (2024). Dosage form design: From concept to compliance-Navigating regulatory standards and patient needs. International journal of drug regulatory affairs.
Mousavi, S., Bereswill, S., & Heimesaat, M. M. (2019). Immunomodulatory and antimicrobial effects of vitamin C. European Journal of Microbiology and Immunology, 9(3), 73-79.
Nwokike, J. (2023). Regulatory reliance and post-marketing surveillance systems for safe and accelerated introduction of new medical products in low-and middle-income countries.
Pardhi, S., Vishwakarma, M. A. K., Marwade, M. S., Patle, M. S., Upadhyay, M. T., & Pandey, M. P. (2024). Significance of Friability and Evaluation of Different Type of Tablet’s For Abrasion in Packaging, Handling and Shipping. Significance, 1(5).
Scholar Publishing Pramod, K., Tahir, M. A., Charoo, N. A., Ansari, S. H., & Ali, J. (2016). Pharmaceutical product development: A quality by design approach. International journal of pharmaceutical investigation, 6(3), 129.
Rawal, M., Singh, A., & Amiji, M. M. (2019). Quality-by-Design Concepts to Improve Nanotechnology-Based Drug Development. Pharmaceutical research, 36(11).
Stielow, M., Witczyńska, A., Kubryń, N., Fijałkowski, Ł., Nowaczyk, J., & Nowaczyk, A. (2023). The bioavailability of drugs—the current state of knowledge. Molecules, 28(24), 8038.
Su, G., & Deng, D. (2023). Evolution of China regulatory guidance on the clinical evaluation of medical devices and its implication on pre-market and post-approval clinical evaluation strategies. Expert Review of Medical Devices, 20(3), 167-178.
Sun, W. J., Kothari, S., & Sun, C. C. (2018). The relationship among tensile strength, Young's modulus, and indentation hardness of pharmaceutical compacts. Powder Technology, 331, 1-6.
Udem, N. D., Umale, A. M., & Anaga, A. (2024). Formulations and Evaluations of Lozenges Containing Freeze Dried Aqueous Extract of Vernonia Amygdalina Combined with Glibenclamide or Metformin for Management of Diabetes Mellitus. Med Discoveries, 3(10), 1212.
Vega, A., Delgado, N., & Handford, M. (2022). Increasing heavy metal tolerance by the exogenous application of organic acids. International Journal of Molecular Sciences, 23(10), 5438.
Wang, H., Chen, Y., Wang, L., Liu, Q., Yang, S., & Wang, C. (2023). Advancing herbal medicine: enhancing product quality and safety through robust quality control practices. Frontiers in pharmacology, 14, 1265178.
Ward, R. M., Benjamin, D., Barrett, J. S., Allegaert, K., Portman, R., Davis, J. M., & Turner, M. A. (2017). Safety, dosing, and pharmaceutical quality for studies that evaluate medicinal products (including biological products) in neonates. Pediatric Research, 81(5), 692-711.
Yost, E., Mazel, V., Sluga, K. K., Nagapudi, K., & Muliadi, A. R. (2022). Beyond brittle/ductile classification: applying proper constitutive mechanical metrics to understand the compression characteristics of pharmaceutical materials. Journal of Pharmaceutical Sciences, 111(7), 1984-1991.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Yahya Kudush Kawa, Prince Tongor Mabey, Musa Mustapha Korjie, Edmond Bockarie Ansumana

This work is licensed under a Creative Commons Attribution 4.0 International License.